Cutting Bowed Material - Craftsman 126.32564 Manual Del Operador

CUTTING BOWED MATERIAL
Before cutting any workpiece, check to see if
it is bowed. If it is bowed the workpiece must
be positioned and cut as shown. (Fig. W)
j/
(Fig. W)
Do not position the workpiece incorrectly or
cut the workpiece without the support of the
fence.
FREEING JAMMED MATERIAL
Release the trigger switch and allow the
blade to come to a stop.
Unplug the miter saw.
Remove the jammed material.
Check the operation of the safety guard.
32