Select Cycle - Amana NDE2330AYW Manual De Instrucciones

Using the Controls
STEP 4

Select Cycle

To select a cycle, rotate the control dial to the desired
setting. When using an Auto Dry cycle, the control dial
should point between "More Dry" and "Less Dry" for
most loads.
Loads of larger or bulkier size may require the "More
Dry" setting to completely dry the load. The "Less Dry"
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of
the cycle.
Regular
The Regular cycle is designed to dry loads such as
towels, underwear, t-shirts, jeans, etc.
No Iron Fabrics
The No Iron Fabrics cycle is designed to dry wrinkle-
free cottons, synthetic fabrics, double knits and
permanent press fabrics automatically. It minimizes
wrinkling by providing an unheated Cool Down period
at the end of the cycle.
Time Dry/Air Fluff
This cycle can be used to regulate the drying time. Use
with Air Fluff, Handwash, No-Iron or Regular
temperature settings. For timed drying, turn the control
dial until the pointer points to the proper time setting
in the Time Dry/Air Fluff cycle.
Note
• Using the Air Fluff temperature setting will require
a longer drying time.
Automatic Wrinkle Out
The Automatic Wrinkle Out cycle helps remove
wrinkles from slightly wrinkled items that may have
been sitting in the dryer or laundry basket overnight.
The cycle has a short heat setting followed by a five-
minute Cool Down.
Note
• The dial can be turned in either direction to select
a cycle. Once started, the dial will not advance at
a specific rate during the Auto Dry cycles. At first
the dial may not advance at all. Toward the end of
the cycle (when the load begins to dry) the dial
will advance at a more regular rate and much
more quickly. This is normal operation.
Control features vary by model.
4