Configuring The Watchin Dt Parameters - RISCO Group WatchIN RK325DT Instrucciones De Instalación

Detector industrial de doble tecnología

Ocultar thumbs

página de 64

/ 64
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Notes:

Virtual BUS zones are cost effective. They enable to expand your system zones without adding physical

zone expanders.

The virtual BUS zone expander can be used only for BUS zone detectors.

To add a BUS zone expander select type BZ08 or BZ16 when adding a zone expander (Quick key [7][1][2]).

1. To Add / Delete the WatchIN DT

1. From the installer menu enter the Add/Delete menu: Quick Key [7][1][9][5] for BUS

Zones detectors.

2. Use the

Zone ID number for which you want to assign (or delete) a detector.

Note:

Make sure that the detector's physical ID number is identical to the ID number you select during programming.

3. Place the cursor on the TYPE field and use the

the WatchIN DT detector.

4. Press

5. Repeat the process for the other BUS detectors.

2. Assigning the WatchIN DT to a Zone

1. From the main installer menu enter Zones: One by One option (Quick key [2][1])

2. Select the zone number that you want to assign the BUS detector.

Note:

If you have defined a BUS Zone Expander, select a zone number from the virtual zones (defined by the BUS

zone expander).

3. Define Partitions, Groups, Zone Type and Zone Sound.

4. In the Termination category select [5] BUS Zone followed by

The following display appears:

Z:001

LINK TO:

ID:01

TYPE=IDT25

5. Select the BUS zone number to assign to the programmed zone. The type field will be

updated automatically when selecting the zone.

6. Press

and the following display appears:

Z:001

RESPONSE:

N/A-BUS ZONE

7. Press