Specifications; Specifications Subject To Change Without Notice - Rockford Fosgate Pro serie Manual De Instrucciones De Instalación Y Operación

S
PECIFICATIONS
MODEL- PRO
Continuous Power Rating (RMS) - Measured at 14.4 Battery Volts
4Ω Load Per Channel
2Ω Load Per Channel
4Ω Load Bridged (Mono)
Dimensions: (with Endbell)
Height
Width
Length
Battery Fuse Rating (Amp)
(External to Amplifier)
Fuse Type
Signal-to-Noise Ratio
Crossover Slope
Crossover Frequency (Models 300SP & 400SP)
Crossover Frequency (Model 500XP
Frequency Response
Bandwidth
Damping Factor @ 4Ω (at output connector )
Slew Rate
IM Distortion (IHF)
Acceptable Signal Voltage Range
Protection
Equalization (45Hz Punch Bass) (Models 150S & 200S)
Equalization (45Hz Punch Bass) (All Other Models)
Input Impedance
The Blue Rockford PCB are exclusive for the PRO Series of Rockford amplifiers.

Specifications subject to change without notice

14
300SP
75 Watts x 2
150 Watts x 2
300 Watts x 1
2.4" (6.1cm)
9.8" (24.89cm)
11.35" (28.96cm)
30A
ATC
NOMAD - Internal analog-computer output protection
circuitry limits power in case of overload. Thermal
switch shuts down the amplifier in case of overheating.
400SP
100 Watts x 2
200 Watts x 2
400 Watts x 1
2.4" (6.1cm)
9.8" (24.89cm)
12.35" (31.42cm)
40A
ATC
>100dB A-weighted
12dB/octave Butterworth
variable from 50Hz to 210Hz
Fixed 80Hz LP, AP, 120Hz HP
20Hz to 20kHz ±0.5dB
20Hz to 200kHz ±3dB
>200
30 Volts/ms
<0.05%
Variable from 250mV to 6V (RCA Input)
Variable from 0.5V to 11V (High Level Input)
Switchable from 0dB to +6dB to +12dB
Variable from 0dB to +18dB @ 45Hz
20k ohms
500XP
62.5 Watts x 4
125 Watts x 4
150 Watts x 2
2.4" (6.1cm)
9.8" (24.89cm)
13.35" (33.96cm)
50A
AGU