Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Press [Recording Switch] to start recording. The recording starts with a beep sound.
[Recording LED] turns red.
Press [Recording Switch] once again to stop recording.
The recording stops with two beep sounds. [Recording LED] turns off.
TAKING PHOTOS
Press [Picture Capture Switch] to take photos. A still picture is taken with a beep
sound. [Recording LED] turns red while recording the picture.
INTERVAL RECORDING
You need to configure the settings using a monitor or the QBiC SetupTool. Please
refer to the QBiC instruction manual for further information.
Movie/Photo file format
The format in the bellow applies.
Movie/Photo
Movie
Photo
* Factory setting of Image Mode (both movie and photo): HD (1280x720) 30fps
LIVE VIDEO VIEWING
By connecting the product to a smart phone or tablet via WiFi, you can watch the video
you are recording in real time. You can use a smart phone or tablet as a preview monitor
for QBiC.
There are 2 ways to connect the product to a smart phone or tablet, either through
ad-hoc communication or through infrastructure communication.
Please note that some devices may not support above methods. Make sure to check the
specification of your device before you start the configuration.
A "Wireless LAN access point" needs to be set up separately to connect through
infrastructure communication.
File format
File format: H.264
(H.264/48kHz L-PCM)
File Extension: .mp4
File format: JPEG
File Extension: .jpg
11
Tabla de contenido
