ION CD DIRECT Guia De Inicio Rapido página 7

Prepare the recording source.
6.
To record from a record:
Please ensure that the white protective cover has first been removed from the turntable stylus.
Then move the tonearm to the edge of the record or a position on the record and slowly put it down.
While the turntable is stopped, the PLAY/PAUSE
To record a sound played by an audio device connected to the LINE IN terminal:
Play the unit connected to the Line In terminal.
• To prevent the beginning part from being cut out, cue the unit and pause playback temporarily, then after
starting recording, release the pause of the unit to start playback.
• If the unit does not have the pause function, after starting recording, start playback of the unit.
Press the PLAY/PAUSE button to start recording.
7.
When the playback of the source finishes, press the STOP
record finishes and the turntable stops rotating, recording automatically ends.
To prevent unwanted noise from the tone arm, stop the recording manually by using the STOP
soon as the playback of numbers you want to record finishes. When recording is stopped, "REC" and "-End-"
blink for several seconds. Do not turn OFF the power or shake the unit during recording or when "REC" and "---
--" are blinking. Such actions prevent proper recording.
To stop recording
Press the STOP
To pause recording
Press the PLAY/PAUSE
restart recording, press the PLAY/PAUSE button
• You cannot restart recording while "bUSY" is displayed.
• Remember that every time recording is paused or stopped, a new track number will always be assigned.
It is not possible to record in two "stages" within one track.
• The unit will not stop or pause even if the PLAY/PAUSE
recording has started.
Manual track division
It is possible to divide the recording into tracks while recording. While recording is taking place, press the
TRACK SPLIT button. The current track number will be increased by one.
• The TRACK SPLIT button works regardless of the MANUAL/AUTO REC setting.
• You cannot divide the track manually to make a track of less than 10 seconds. Up to 99 tracks can be
made on a disc depending on the CD specifications.
• When the TRACK SPLIT button is pressed while recording the recorded sound will be cut for a moment.
button to stop recording.
button. "bUSY" briefly appears on the display, and the recording is paused. To
button will not work and you cannot start recording.
button to stop recording. When playback of a
.
button is pressed within 10 seconds after
8
button as