Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Step 2: Put it together
Microphone
stand
Party
system base
Clutches
Microphone
stand
Device
cradle,
back
Microphone
stand
Insert the microphone stand into the
center of the party system base as
shown here.
Screw the microphone stand clockwise
into the base until it's fastened tight.
IMPORTANT: Make sure the
microphone stand is tightened as
much as it can be before proceeding.
Adjust the height of the stand by
turning each clutch counterclockwise
and lifting the pole to the desired
length.
Make sure to tighten each clutch (turn
clockwise) before you proceed.
Attach the device cradle to the stand
using the locking knob. Place the
cradle on the top of the stand. Then
insert the locking knob in the hole
on the back of the device cradle and
Locking
tighten it until the cradle feels secure.
knob
Do not overtighten!
3
Tabla de contenido
