Klarstein 10024015 Manual Del Usuario página 8

Control Panel and Operation
Press and hold this button for 3 seconds to unlock the control panel. A beep will signal unlocking.
You can switch between display in Fahrenheit and Celsius by pressing for one second. The number
of degrees is shown in blue colour on the screen.
Press the button in the unlocked panel to turn off the lighting in the display and the interior. Press
the button again to turn both lights on again. The interior lighting switches itself off automatically
after 10 minutes in order to save energy.
You can increase the desired temperature by pressing this button. The temperature is changed in
steps of 1° F or 1° C.
You can reduce the desired temperature by pressing this button. The temperature is changed in
steps of 1° F or 1° C.
Your wine cooler is equipped with an automatic control panel lock that activates about 12 seconds after the
last input.
Problem
The device is not running.
The device is not cold enough.
The light does not work.
Loud noises.
Troubleshooting
Possible Cause
Device is not plugged in, defective or folded-over fuse.
Check the temperature settings.
The ambient temperature requires a higher setting.
The door was opened too often.
The door is not closed properly.
The door seal is not properly sealed off.
The air cannot properly circulate.
Please contact customer service.
The device is not level.
Check the fan.
8