Permitted Environmental Conditions; Permitted Uses - TSM DURASWEEP Serie Manual Del Usuario

DURASWEEP 50&70
OPERATING MANUAL
1.2 Assembling the side brush
1. Take the side brush Detail 2 Fig. 2 out of the bin Detail A Fig. 1
2. Unscrew and remove the three bolts Detail 1 Fig. 1; assemble the brush so that the three pins fit into the holes
Detail 3 Fig. 2
3. Replace the three bolts Detail 1 and screw on tightly to block the brush.
4. Once assembled, the side brush makes contact with Detail 2 Fig. 2 blocking the pulley where to place the elastic
belt Detail 5 Fig. 1
5. Pull the belt Detail 5 forwards and fit it into the plastic pulley Detail 4.
6. Unscrew the screws Detail 6: the purpose of these screws is to keep the belt taut while assembling the brush.
Once the brush has been assembled these screws are no more needed.
7. Secure the cover Detail 1 Fig. 3 using the three screws Detail 2 Fig. 3.
2

PERMITTED ENVIRONMENTAL CONDITIONS

FOR THE ENDOTHERMIC VERSIONS: 50&70ST:
MINIMUM WORKING TEMPERATURE: - 28° C (- 18,4° F)
MAXIMUM WORKING TEMPERATURE:
FOR THE ELECTRIC VERSIONS: 50&70BT:
MINIMUM WORKING TEMPERATURE
MAXIMUM WORKING TEMPERATURE
IMPORTANT: Do not use or leave parked with temperatures above +45° C (+113° F).
3 PERMITTED AND FORBIDDEN USES

3.1 Permitted uses

The 50&70ST sweeping machines are designed for cleaning ground surfaces under the following conditions: types of
material to be swept up from ground: machining residues, dust, grit, dirt in general; types and features of working
surfaces (ground): hard, flat and compact surfaces such as: asphalt, concrete, wood surfaces, metallic surfaces,
ceramics, marble, smooth or rusticated plastic materials fibre or synthetic (*) cut moquette; type of environment: closed
environments (electric versions), open environments (endothermic versions).
V01
38° C (+ 100° F)
- 20° C (- 4° F)
+ 40° C (+ 104° F)
(*) to avoid electrostatic charges on these surfaces, natural fibre brushes are essential.
TSM - Technological Systems by Moro Srl
Via F.lli Zambon,9 - 33080 Fiume Veneto (PN) – Italy
Tel. +39.0434.564167 - Fax +39.0434.954069
www.tsmitaly.com – [email protected]
21