Kohler K-2269 Guia De Instalacion página 4

Ocultar thumbs Ver también para K-2269:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

29-3/4" (75.6 cm)
Min.
*Recommended overall height with lavatory
installed. Height may be adjusted to accommodate
various applications.
1. Preparation
Shut off the main water supply.
Rough-in the hot and cold water supplies and drain piping.
For the recommended lavatory height of 33-3/4" (85.7 cm), the
centerline of the wall bracing must be 30-1/16" (76.4 cm) from the
finished floor. For height variances, adjust the wall bracing and
centerline height accordingly.
Install sufficient bracing between the studs for securing the
lavatory to the wall.
Use the template provided to determine which cutout line to use
for above-counter installation.
Cut out the paper template along the appropriate cutout line.
Position the template on the countertop. Tape it securely, and
trace the template on the countertop using a soft lead pencil.
Cut out the opening by carefully cutting inside the pencil line
traced from the template.
Temporarily set the lavatory into the cutout to check fit. Remove
the lavatory and make any necessary adjustments.
Verify that the cabinet is level to ensure proper installation.
Install the water supplies and drain piping according to the
roughing-in information.
1007273-2-B
21" (53.3 cm)
Min.
29-3/8" (74.6 cm)
*33-3/4"
(85.7 cm)
4
Kohler Co.
Tabla de contenido
loading

Tabla de contenido