Product Operation - Royal Sovereig RBC-2100 Manual De Instrucciones

PRODUCT OPERATION

1. Attach power cable to back of machine, plug into a three prong outlet, and turn power switch on.
The unit will conduct an automatic self-diagnostic test to ensure accurate counts.
-
After five seconds of the counting wheels spinning, the screen will display a "0".
-
If there is a problem, the preset display will show an error code. (See ERROR CODE DISPLAYS
-
-LOCATED ON PAGE 10.)
2. Select bill counting settings: Before counting, select counting settings that are related to your counting
needs:
Counting and detecting bills by UV, MG, and IR
When the machine is automatically turned on, it is set to check bills
by UV, MG, and IR counterfeit detection.
Counting and detecting bills by UV
Press "FUNC" button once, now the machine is in UV mode. It
will check bills for Ultraviolet marks while counting.
Counting and detecting bills by MG
Press "FUNC" button once more, now the machine is in MG mode.
It will check bills for Magnetic Ink while counting.
Counting and detecting bills without counterfeit detection
Press "FUNC" button once more so the UV / MG / IR lights are off.
This means the machine is in normal count mode and will count
bills without detection.
UV MG IR
COUNT
D D
BAT
ADD
PCS
UV MGIR
COUNT
D D
BAT
ADD
PCS
UV MGIR
COUNT
D D
BAT
ADD
PCS
UV MG IR
COUNT
D D
BAT
ADD
PCS
6