Control Panel - Royal Sovereig RBC-2100 Manual De Instrucciones

CONTROL PANEL

UV Counterfeit Detection
Counterfeit bills often use white or bleached paper, which will glow under ultraviolet light. To use ultraviolet counterfeit
detection, press the "FUNC"button. The UV mode indicator will turn on showing that function is on.
Magnetic Counterfeit Detection
There is a presence of magnetic components that are standard in authentic bills. The magnetic sensor detects for the
magnetic components. To use magnetic counterfeit detection, press the "FUNC" button. The MG mode indicator will
turn on showing that the function is on.
Infrared Counterfeit Detection
Infrared light is used to measure the width of the center of each bill. The light will detect if there is an odd-sized bill. To
use infrared counterfeit detection, press the "FUNC" button . The IR mode indicator will turn on showing that the
function is on.
Dimensional Detection
Press the "FUNC" button until the DD light is on. Dimensional detection measures the width of the center of the bill by
using Infrared light. If the detector finds an odd sized bill, the unit will sound and an error code will appear.
ADD Mode
Press the "ADD" button. The machine is now in add counting mode. Place bills into the hopper and the machine will
automatically begin to count them. When you remove the counted bills from the stacker and place new bills into the
hopper it will continue counting where it left off on the previous set of bills. To stop using the add mode press the
"ADD" button again and the indicator light will shut off.
BATCH Mode
Press the "PRESET" button. The BAT indicator light will turn on, indicating the machine is now in batch counting mode.
The machine will stop counting once it reaches the batch number. Press the "+" and "-" buttons to flip through batch
quantitites.
5