Technical Specifications - TC Electronic THRUST BQ250 Guia De Inicio Rapido

18 THRUST BQ250/BQ500
Technical Specifi cations
BQ250
Audio Inputs
Instrument input ¼ " TS, unbalanced
Impedance 1 MΩ
Aux input 1⁄8" TRS, unbalanced
Impedance 10 kΩ
EQ Controls
Bass 80 Hz @ Gain: ±15 dB
Lo-mid 400 Hz @ Gain: ±15 dB
Hi-mid 800 Hz @ Gain: ±15 dB
Treble 10 kHz @ Gain: ±15 dB
Compressor Controls
Thrust Variable (off to max)
Thrust switch On / Off
Audio Outputs
Phones out 1⁄8" TRS, unbalanced
Impedance 47 Ω
Direct output XLR, balanced
Impedance 1 kΩ
Level max Pre EQ ( +12 dBu), Post EQ ( +16 dBu)
Loudspeaker output Professional locking connector
Min. load impedance 4 Ω
System Data
Max output power* 250 W
Mains Voltage
Europe/UK/Australia/China/
100-240 V~ 50/60 Hz
Korea/USA/Canada/Japan
Power consumption 60 W
Mains connection Standard IEC receptable
Physical
69 x 255 x 233 mm
Dimension (H x W x D)
(2.7 x 10 x 9.2)"
Weight 2.2 kg (4.9 lbs)
*independent of limiters and driver protection circuits
Due to continuous development, these specifi cations are subject to change without notice.
BQ500
500 W
80 W
2.3 kg (5.1 lbs)
Other important information
Important information
1. Register online. Please register your new
MUSIC Group equipment right after you purchase it by
visiting tcelectronic.com. Registering your purchase using
our simple online form helps us to process your repair
claims more quickly and effi ciently. Also, read the terms
and conditions of our warranty, if applicable.
2. Malfunction. Should your MUSIC Group
Authorized Reseller not be located in your vicinity,
you may contact the MUSIC Group Authorized Fulfi ller
for your country listed under "Support" at behringer.com.
Should your country not be listed, please check if your
problem can be dealt with by our "Online Support" which
may also be found under "Support" at tcelectronic. com.
Alternatively, please submit an online warranty claim at
tcelectronic. com BEFORE returning the product.
3. Power Connections. Before plugging the
unit into a power socket, please make sure you are using
the correct mains voltage for your particular model.
Faulty fuses must be replaced with fuses of the same type
and rating without exception.
Quick Start Guide 19