Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Check List for Wash
Process
1) Make sure all items are loaded
in the racks and silverware
basket properly.
Note:
Do not load tall dishware
or cookware
items near middle
spray arm as
they may block the spray arm from rotating.
2) Pour the proper
amount
of detergent
into the detergent
dispenser.
Note:
If "RINSE 4" indicator
light display
is "ON"
indicating
that it is empty,
add "Rinse Aid"
agent
at this time.
3) Close the door and latch properly.
4) If you need to use the "HI-TEMP WASH"
option,
you must do so before selecting
the wash cycle.
Note"
This option
can be selected only with Pots & Pans, Normal
or Glassware
Wash Cycles except Rinse & Hold Cycle,
5) Select the desired wash cycle by matching
the knob "Pointer"
to cycle "Dot",
Once you are at this point, turn the power
button
"ON",
You will hear a "Click"
and the wash process will begin at this time.
6) To turn the power
off at the end of the cycle, simply press the "POWER"
button,
7) If you want to speed up the drying
process after completion
of the cycle, keep the
door open slightly
to release the moist air,
Warning:
Keep children
away from the machine
when the door is opened
to dry
the dishware
because
the moist hot air exiting
out of the door may
cause harm.
Canceling
or Resetting
Wash
Cycle
Note:
The dishwasher
will release detergent
automatically
within
a few minutes of
the start of a wash. To avoid the "release
of detergent"
before you cancel or
reset the wash cycle, you must press "POWER"
button immediately.
• Once you have reset to a new wash cycle, you must refill the detergent
compartment
if it is open and empty because
the detergent
from previous
wash
cycle may have already
been released,
Follow the steps below to cancel or reset a wash cycle:
1) To cancel or reset a wash cycle, press "POWER"
button to "OFF" position
to turn
the dishwasher
off. You will notice that power
indicator
display
light shuts off,
Tabla de contenido
