Depuragua RO-50G-A01 Manual De Instalación Y Mantenimiento página 8

MANUAL/NOTICE DÌNSTALLATION/MANUALE DI INSTALLAZIONE (MODELS RO A01 &E01)
1.9 Remove membrane membrane sheath.
1.10 Place the new membrane in the membrane housing
1.11 Reconnect tube carrier head membrane
Following change:
1.12 Plug the equipment from the electrical outlet (A01)
1.13 Open valve water supply (1)
1.14 Open the valve of the tank (14). Open faucet to release pressure
1.15 Let the team produce 1 water tank and reject it (do not drink that water)
1.16 After from finished the change because you can enjoy pure water again.
8.5. System disinfection.
Your reverse osmosis system should be disinfected periodically (usually done once a year
coinciding with the change of filters) You have to disinfect 3 elements, vessels, the,
membranes and deposit.
Step 1: Prepare a disinfectant solution
Purchase a disinfectant solution to osmosis or failing to prepare it with tap water and a few
drops of food Sanitizer per liter of water. (not necessary more because if we put too much you can
leave a taste in the water for a few days). For the deposit is not necessary to bleach because the
tap water because it contains chlorine.
Step 2: Disinfection of vessels
1 Open the vessels by unscrewing the lid.
2 Remove filters and throw away them
3 Fill vessels with the solution and leave it for 30 minutes.
4 Empty the vessel and dry them with a clean cloth.
5 Replace the filter and screw tubes vessels.
6 Continue with disinfection of the membrane
Step 3: The porta disinfection membranes
1 Open the porta membranes by unscrewing the lid.
2 Remove the membrane to replace and pull
3 Fill the porta membranes with the solution and leave it for 30 minutes.
4 Empty the porta membranes and dry with a clean cloth.
5 Replace the new membrane and reconnect tubing.
6 Continue with the tank disinfection
(See picture 6)
8