Transcend 365 miniCPAP Auto
Enter the Settings screen by pushing the Up button to highlight the icon, then press the
Center button to select it.
In the Settings section you will see four subsections:
Therapy Settings
•
Mask/Tube Settings
•
Language/Units
•
Device Information
•
Press the Center button to enter the Therapy Settings.
Ramp Settings____________________________
The Ramp setting starts therapy pressure at a lower setting and gradually increases
pressure until it reaches the prescribed therapy pressure, so you can fall asleep
comfortably. To activate Ramp during therapy, press the down button.
From the Home screen, select the 'Setting's icon using the directional buttons and the
Center button. Toggle down to highlight Ramp and press center button to make comfort
adjustments.
Use the Up or Down button to change the Ramp pressure (you cannot go past your
starting pressure). Remember to press the Center button to save your selection.
Use the right arrow to highlight and the Center button to select Ramp Duration in
minutes. Press the Up or Down buttons to change the duration from 0 to 45 minutes,
moving through increments of five minutes. Press the Center button to save your
selection.
EZEX Settings____________________________
The EZEX feature allows you to reduce pressure when you exhale for more comfortable
therapy.
Push the Down button to highlight EZEX, then press the Center button to adjust settings.
The EZEX settings adjust the amount of pressure drop on exhalation, so that you can
comfortably exhale while using your CPAP.
TM
Quick Guide
8
ENGLISH
Page 7