Transcend 365 minicpap Auto Guía Rápida página 22

Transcend 365 miniCPAP Auto
4. Repeat steps 2 and 3 as needed to fill and check the distilled water level in the
reservoir. The reservoir should be completely filled before each use.
Figure 1 Line the heater cartridge up with the opening in the reservoir. Lower the device onto the
reservoir. Magnets will engage to hold the two parts together.
5.
Once the reservoir is filled completely, set it on a secure, flat surface and line up
the CPAP heater cartridge with the opening in the reservoir.
Hold the reservoir in place and set the CPAP onto it so that the magnets snap the pieces
together securely.
TM
Quick Guide
22
ENGLISH
Reservoir should
be filled to the
'Max Fill' line.
Line up the heater
cartridge with the
opening in the
reservoir.
Page 22