Idiomas disponibles
Idiomas disponibles
1.- Introduction.
Dear gentlemen, with the objective to optimize use of our lifting tower T-107 we have
written out this manual.We beg you read attentively these directions before making use
of the tower.
All our products have been submitted to the more exigent tests and controls in the
process of fabrication.
In order that the certifications incorporated to the present manual take effect they will
have to use original spare parts in all the reparations.
The reference number and the year of the construction or serial number must be
indicated in order to any consultation on the product.
2.- Technical data.
Lifting telescopic tower model T-107. This tower is designed in order to lift up loads in
vertical sense to different heights, as support for structures and gadgetry of illumination.
2.1.- Max. load: 325 kg.
2.2.- Min. load: 25 kg.
2.3.- Max. height: 7 m.
2.4.- Min. height: 1,90 m.
- Minimal height for the load. 0,20 m.
2.5.- Base area: 2,25 x 2 m.
2.6.- Folded base area: 0,5 x .0,5 m.
2.7.- Weight: 175 kg.
2.8.- Winch: 900 kg. maximum load with automatic brake to stop the load. Certified in
Düsseldorf according to DIN 15020 and VBG 8 with the number GS03015.
2.9.- Cable: Steel DIN 3060. Quality 180 kg/mm
. Twisting – resistant. 6 mm cable
2
diameter.
2.10.- Construction material: Principal body aluminum profiles 6082-T6. Base and legs
steel profiles EN 10305.
2.11.- Sliding system on nilatron rollers five profiles operated by steel cable guided by
pulleys grooved with pads of bearing balls.
2.12.- Stabilizing adjustable plates in the legs with nonslip supports of rubber.
2.13.- Anchorage of the legs by security triggers (R).
2.14.- Internal security system against the breaking of the cable.
2.15.- Bubble's level to adjust tower's vertical position.
2.16.- Antirust protection and anodized.
