Setting The First Printing Line (Tof) - Dascom MPI LA650+ Guia De Instalacion

Quick Start-en.book Seite 28 Freitag, 16. Oktober 2009 1:20 13
Settings
Setting the first printing line
(TOF)
Adjust Paprpath
Menu Char Online
1 2 3 4
Setup
TOF
Head Tear Online
1 2 3 4
Setup
B
A
FormAdj= 12/72"*
Set < > Exit Online
1 2 3 4
Setup
28
Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
You can use the TOF function for setting the position of the first printing line for
each paper source and each menu individually.
Before using the TOF function (if fanfold paper is used), you first have to set the
tear position (see above).
Swing the soundproofing cover towards the front (see "Printer at a glance",
page 5).
Press the Setup key. The printer changes to setup mode.
Press the Adjust (2) key.
Press the TOF (3) key.
The paper is fed to the position where the bottom edge of the
first printing line
A
printer. The factory setting for the first printing position
(TOF) is 12/72". This is equivalent to the second line from
the top.
Press the < (2) or > (3) key to move the first printing line to the desired position.
You can set values from 0 to 220/72" for fanfold paper or for single sheets.
12/72" corresponds to a printing line.
Quick start guide
is aligned with the tear edge of the
B