How To Use - RugDoctor Pro 93296 Manual De Usuario

How to use:

PREPARING TO CLEAN
IMPORTANT CLEANING TIP:
before deep cleaning. Always test in inconspicuous area with small amount of cleaner before using.
1
Raise the
Main Handle
Make sure Handle
of the Pro Deep
Cleaner is in the
upright position
(as seen above)
until handle locks
securely.
CONNECT THE HOSES
1
Open the
Vacuum
Hose Port
Pull the black
rubber flap
upward to open
the Vacuum Hose Port.
4
Attach Upholstery Tool to Handle
Once separate from
the machine, connect
the Motorized
Upholstery Tool & Tool
Handle (as pictured
above). Press the
two pieces together
firmly to assure a tight
connection
6
RUG DOCTOR PRO
Vacuum/clean area with a dry vacuum or microfiber mop thoroughly
2
Check the
Power Button
Make sure the Power Button
is in the "off" position.
2
Connect the
Vacuum Hose
Insert the
Vacuum Hose
Cuff into the
Vacuum Hose
Port (marked
"A").
MOTORIZED UPHOLSTERY CLEANING TOOL
®
3
Add Cleaning
Solution
Add Rug Doctor
Cleaning Solution
and warm water to
the Clean Water
Tank as per the
cleaning solution
instructions.
3
Connect the
Solution Hose
Insert the
Solution
Hose into
the Solution
Hose Port
(marked "B").
5
Plug in the machine
Insert plug into a properly
grounded outlet.
CAUTION
Before plugging
machine in check
the Power Button to
make sure it is in the
"off" position.
| U s e r M a n u a l