Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation
9. Operation
Additional
Hardware and
Software
Item
VIP™ Driver
LED Studio
VIP™ Signal Distributor
(optional)
PVP™ X Series Rigging Bar
(optional)
Neutrik® etherCON® Signal
Extension
(optional)
Neutrik® powerCON®
Extension
(optional)
VIP™ Media System and one
VIP™ Driver
VIP™ Media System with
ArKaos MediaMaster Express +
KN and One VIP™ Driver
ArKaos MediaMaster Express +
KN
26
In addition to the panels, you will need other hardware and software to design, build, and
operate your VIP™ video wall system. The following table summarizes these additional
items—some are required and others are optional.
Interface between the signal source, LED Studio, and the
PVP™ X3 being used
Software application used to design and run the PVPs
comprising the video wall. A PC is needed
Connects between the VIP™ Driver and the PVPs to
distribute the source signal from the VIP™ Driver to the
video wall
Provides hardware needed to mount PVP X series.
Neutrik etherCON extension cable; 18 in.
Neutrik etherCON extension cable; 5 ft
Neutrik etherCON extension cable; 10 ft
Neutrik powerCON® Extension, 18 in
Neutrik powerCON® Extension, 5 ft
Neutrik powerCON® Extension, 10 ft
Neutrik powerCON® Extension, 25 ft
Neutrik powerCON® Extension, 50 ft
Rack mountable, video computer system with the VIP™
Driver and LED Studio software
Rack mountable, video computer system with the VIP™
Driver and LED Studio software, as well as ArKaos
MediaMaster Express
Video playback software + KN control
Description
Item Code
99090575
99090576
06090926
19090363
19090364
19090365
19110372
19110373
19110374
19110375
19110376
PVP™ X3 User Manual, Rev. 1
Tabla de contenido
