SELFSAT SNIPE PRO Manual De Instrucciones página 10

D. Changing the satellite
Function
CCW / CW button" Light
E. Back to Home position
Function
F. GPS LED light
Function
Description
"Satellite
i. If you want to change desired satellite, you can change the
target satellite using the "CCW / CW" buttons, then press
the "OK" button to select the new satellite.
"OK" Button
Description
i. Whenever you wish to return the antenna back to the Home
"HOME" Button
position, press and hold the"Home" button for a few seconds.
Description
i. GPS LED confirms the current location from 24 GPS satellites
in the world.
ii. When your SNIPE PRO identifies a GPS signal, GPS LED light
will remain on, regardless if the antenna is pausing or
moving.
GPS can help to search for the satellite faster & catch the
"GPS" light
optimum satellite signal, and assist SNIPE PRO to acheive
the best elevation & skew angle.
iii. Also, while program updating, the GPS LED light will flash
to show the update procedure is processing. During this
time, GPS LED light on doesn't mean the unit is communi-
cating with GPS satellite.
Operation
Operation
Operation
9