Safety Decals - Powermate PRTT212 Manual De Operación

Safety Decals

• Save all instructions
This tiller has been designed and manufactured to provide you with the safety and reliability you would expect from an
industry leader in outdoor power equipment manufacturing .
Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to
operated this equipment safely and effectively, we have placed several safety labels on the tiller to remind you of this
important information while you are operating the unit .
These important safety labels are illustrated below, and are shown here to help familiarize you with the location and content to the safety messages you will see as you perform normal tilling operations . Please review these labels now .
If you have any questions regarding their meaning or how to comply with these instructions, reread the complete safety
instruction text on the preceding pages, or contact your local dealer .
Should any of the safety labels become unreadable because of being worn, faded, or otherwise damaged during the use of
your tiller, please contact your local authorized dealer to order replacement labels .
The safety labels are easily applied, and will act as a constant visual reminder to you and others who may use the equipment .
Following the safety instructions is necessary for safe, effective operation of your tiller .
Questions? Call Toll Free at 1-800-737-2112
• Gasoline is flammable. Allow engine to cool at least 2 minutes
before refueling.
• Operation of this equipment may create sparks that can start
fires around dry vegetation. A spark arrestor may be required.
The operator should contact local fire agencies for laws or
regulations relating to fire prevention requirements.
Copyright © 2019 MAT Engine Technologies, LLC
6
• Keep away from
rotating tines.
• Contact will result
in injury.
1. Insert the locking pin to secure the
wheels in locked position.
2. Turn the Engine Switch to the "ON" position.
3. Move the Fuel Valve lever to the "ON" position.
4. Move the Choke lever to the "START" position.
5. Adjust the Throttle Control to the high speed.
6. Pull the Starter Handle until engine starts
7. After starting the engine, move the Choke lever
to the "RUN" position.