(6) Bypass button (By-Pass)
Left click this button, 31 band equalizer skipping all (just change the gain value,
don't change the Frequency and Q value). Click again and all equalization
parameters reappear to previous data without bypass.
(7) Mode switch button EQ
This is a toggle button for PEQ parametric equalizer mode and GEQ graphic
equalizer mode. Click this button and open a dialog box, click "YES" to change EQ
mode. The difference between graphic EQ mode and parametric EQ mode is as
follows:
(A) GEQ
Graphic Equalizer: It adopts constant Q technology, and for each
frequency point a fader is established that the frequency band of the filter never
changes, no matter increasing or decreasing a frequency. And you can make the
structure of the graphic equalizer much simpler and
straightforward, popularly used extensively in professional audio for finer
compensation.
(B) PEQ
Parametric Equalizer - For more detailed settings for various parameters
including Frequency Band, Frequency Point, Gain, Q value, etc., you can also
beautify / unify and modify the sound that makes the sound (or music) more bright,
rich and colorful to get the artistic effect you wanted.
5.5.9. Quick adjustment, master volume area.
Left-click on the "Quick set" icon below the volume and the dialog box will appear as
shown below:
Attention please:
(WHEN USING THE RESET FUNCTION COMPLETELY) Please note that it is
only recommended for the use of test tests, operated by a professional or an
expert end user, otherwise please do not choose it if you do not have
experience, since It can cause serious damage to the speakers or they will burn
in some situation, due to bad operation.
GDSP-31404A
Genius CarAudio
23