Link - Genius Audio GDSP-31404A Manual Del Usuario

(4) Output channel CH1 -CH8 MUTE
Left-click on the icon
change to . That is the MUTE status, click again to cancel the MUTE.

5.5.5 LINK.

Left-click on the LINK icon, the options box will appear as shown below on the
graph, and then you can choose the alignment or LINK link mode you want.
(1) choose the sync style you want, either (LR Link) and / or (Link ALL) click OK,
or click to enter a new LINK mode (as shown below) Click " From Iink "to exit
LINK mode. Look at the charts below.
(2) By choosing the sync style (LR Link) and clicking OK,
It will allow to link the CH1 and CH2, CH3 and CH4, CH5 and CH6, CH7 and
CH8, and adjust the frequency settings made on the L side will pass equal to R,
if you do not want this synchronization, click on (Del Link). Look at the following
graphic about the run message like this:
GDSP-31404A
Genius CarAudio
down the channel CH1 - CH8 volume and the icon will
20