Remote Control - AVer VC520 Pro2 Manual De Instrucciones

Remote Control

Camera Select
Camera Directional
Control
OSD Menu*
SmartFrame
Zoom In/Out
Preset
Brightness -
Call/Answer
*Not support for VC520 Pro2

AAA Batteries (required)

Preset ( ): The Preset button on the
remote serves 2 functions.
To Save a Preset - Move camera to desired
position. Press and hold the preset button
until you receive the save message on the
screen. Select preset position button 0-9 to
store the current camera position. Repeat
steps if needed.
To Load a Preset - Press the preset button
and preset position button 0-9 to load a saved
camera position. Repeat steps if needed.

Press and hold the number button "
for 1 second to turn on or off the WDR
function.

Press and hold the number button "
1 second to turn on or off the SmartFrame
function.
Enter*
"
" for
English-5

Press and hold the number button
" " for 1 second to enable or disable
RTMP streaming function.

Press and hold the number button "
for 1 second to force camera to enter
sleep mode. It will cut all the video
streaming off. To wake it up, press the
button for 1 second again or press
direction button. It's not workable while
USB streaming is on.

Camera Select (
only have one camera and don't need to
do custom settings, the default is
camera 1. If you press camera 2 or 3 on
the remote control, you will find your
remote can't control your camera. In this
case, please press camera 1 on your
remote again.

SmartFrame (
to switch the SmartFrame function
among Manual Framing/Auto Framing/
Preset Framing modes. A message (as
figures shown) will display on the screen
to indicate the mode.
[Note] SmartFrame deploys face and
body defection technology. People
wearing masks or in side facial profiles
still can be detected. The maximum
detection distance is 7-10 meters.
Set up preset points in advance (Only for
Preset point 1-9. Preset 0 is for home
position).
): If you
): Press for 1 second
"