Basic Operations
Turn on/off the power
1. Press [
/ ] button to turn on the unit.
The unit goes back to the last status after
power on if no operations.
2. When on, long press [
the unit.
Mute
Press the [
] button to mute the sound.
Note:
• P ressing the [
volume will unmute.
Adjust the Volume
Press the [
] or [
decrease the volume level.
The adjustable range of volume is 0 to 40.
Playing Source Selection
1. Press the [
show main source menu.
2. Touch desired icon on the the screen to
enter corresponding working mode, such
as Disc, Navi, Radio, etc.
Drag left/right to scroll.
Note:
• When some devices are not ready, they
cannot be selected.
• You should stop switching when the playing
source you desired has been selected and
wait for some seconds, the unit will auto enter
the playing source mode you have selected.
When Vehicle is Put in
Reverse
If the rear view video camera is connected,
the unit automatically switches to CAMERA
source during reverse driving. The unit returns
to the previous source after the vehicle has
been taken out of reverse.
] button to turn off
] button again or adjusting
] button to increase or
] button on the panel to
When Parking Brake Applied
1. If 'PRK SW' cable is connected to hand
brake switch, the video display of the TFT
monitor will be controlled by driving status,
system setup and input video sources.
2. When the car is moving forward, and a
video source is being played, the screen will
display a warning disclaimer and a blank
screen. The warning screen will prevent the
driver from watching images.
Customized
Press the [
1. Choose theme:
[Theme 1], [Theme 2].
2. Choose wallpaper:
[Live wallpapers]: to show the wallpapers
with animation stored in the unit. Drag up/
down to scroll.
[Photo]: to visit the photo of mobile storage.
[Wallpapers]: to show the wallpapers stored
in the unit. Drag left/right to scroll.
Select desired picture to view, touch [Set
wallpaper] to confirm selection.
3. Choose LOGO
EN-6
] of the main menu.