Festo SBOC-M-R1B-H Manual De Instrucciones página 21

2 Mounting and installation instructions
Warning
S Before mounting, installation and maintenance work,
always switch off the power supply for the electronic
components.
S Use only power sources which ensure reliable elec-
trical isolation of the operating voltage as per EN
60204-1. Observe also the general requirements for
PELV circuits as per EN 60204-1.
S Use screened plug connectors to ensure continuous
contact between the screening/shield and the Com-
pact Vision System.
S Connect the screening of the cables with low imped-
ance to earth potential.
S The system contains electrostatically sensitive
components. Therefore, do not touch any compon-
ents. Observe the handling specifications for electro-
statically sensitive devices.
S Do not open the housing.
Caution
S Make sure that a tolerance of ±10% is maintained in
the operating voltage supply.
S Protect the power supply for the Compact Vision
System externally with a quick-acting miniature fuse,
2 A.
Festo SBOC-M-R1B-H Z6 1201NH English 21