Symbol CS 2000 Manual Del Propietário página 10

Send Collected Bar Code Data to the Computer
To transfer bar code data from the CS 2000 to the computer:
1. If you are using the cradle, make sure the cable connec-
tion between the cradle and the computer is secure. If you
are using the communication cable alone, make sure the
connection between the cable and the computer is secure.
2. Insert the CS 2000 in the cradle or connect the communi-
cation cable to the scanner as shown.
3. Use your application software to upload stored data from
the CS 2000 to your computer. How this transfer occurs depends on your specific application. Refer
to your application software manual for instructions. When communication starts, the green LED
blinks and the scanner beeps.
C S 2 0 0 0
10