Installing Interior Assembly Cont; Installation Overview - Honeywell 8734001 Guía De Instalación Y Funcionamiento

INSTALLING INTERIOR ASSEMBLY (CONT.)
13. Installing Batteries
a. Insert 4 AA high quality Alkaline batteries into the Battery Compartment in the
direction noted +/- on the Compartment. The Lock will beep 2 times, the keypad
will illuminate blue, and the Honeywell button will flash green twice to signify that
it has received power (Figure 13a).
NOTE: Do not touch the Keypad until the blue light turns off.
Do not use rechargeable batteries or non-alkaline batteries.
b. Slide the Battery Cover down into the track on the Interior Assembly to cover
the batteries (Figure 13b).
14. Testing Lock
With the Door Open
a. Test the Lock using the Interior Lever. The Latch should move smoothly.
b. Test the lock using the Keypad. To lock press and then press "1234"
to unlock.

INSTALLATION OVERVIEW

Light Indicator
Keypad
Override
Access Key
Exterior Assembly
Strike Plate
Mounting Plate
3/4" (19mm) screws
Keys
Rubber Gasket
Interior Assembly
Interior Assembly
Optional
3/4" (19mm) screw
7/8" (22mm) screws
Latch
Tailpiece
Exterior
Assembly
Battery
Cover
Interior
Lever
Figure 13a-b
5/16" (8mm) screws
Battery Cover
1" (25mm) Screw
Page 7