Stanley FATMAX TPL45S Información De Servicio página 7

Adjusting Height and Rotation
The tripod light can be increased in height up to 3.5 feet and rotated up to 360 degrees by adjusting the Extension Poles.
CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
• Make sure the Extension Poles or the light are grasped firmly when adjusting the height as the poles or the Light Head Assembly
could slide down quickly while in the unlocked position. Not doing so could result in injury or damage.
• To avoid the possibility of the unit falling and sustaining damage, always expand the Tripod Legs first before
adjusting the Extension Poles.
The Upper, Middle and Lower Latches flip out to unlock the pole to allow adjustment and flip in to lock the pole in the desired position.
EXTENDING AND ROTATING THE EXTENSION POLES:
1. Flip the Lower Latch outward to unlock the Lower Pole. Then grasp the
Lower Pole and gently push it upward to the desired height (up to 0.5 feet).
Note: The Lower Pole cannot be rotated.
2. Flip the Lower Latch inward to lock the Lower Pole in the desired
position.
3. Flip the Middle Latch outward to unlock the Middle Pole. Then
grasp the Middle Pole and gently push it upward to the desired
height (up to 1.5 feet).
4. Rotate the Middle Pole to adjust the Light Head Assembly to the
desired orientation.
5. Flip the Middle Latch inward to lock the Middle Pole in the desired
position and orientation.
6. Flip the Upper Latch outward to unlock the Upper Pole. Then grasp
the Upper Pole and gently push it upward to the desired height (up
to 1.5 feet).
7. Rotate the Upper Pole to make further adjustments to the orientation of the Light Head Assembly (if needed).
8. Flip the Upper Latch inward to lock the Upper Pole in the desired position and orientation.
RETRACTING THE EXTENSION POLES:
1. Flip the Lower Latch outward to unlock the Lower Pole. Then grasp the Lower Pole and gently pull it downward.
2. Flip the Lower Latch inward to lock the Lower Pole.
3. Flip the Middle Latch outward to unlock the Middle Pole. Then grasp the Middle Pole and gently pull it downward.
4. Flip the Middle Latch inward to lock the Middle Pole.
5. Flip the Upper Latch outward to unlock the Upper Pole. Then grasp the Upper Pole and gently pull it downward.
6. Flip the Upper Latch inward to lock the Upper Pole.
TPL45S_ManualENSP_022414.indd 12-13
UPPER POLE
MIDDLE POLE
LOWER POLE
UPPER LATCH
MIDDLE LATCH
LOWER LATCH
12
Tilting the Light Head Assembly
The Light Head Assembly can be tilted downward to a maximum 90-degree angle to adjust the light beam as needed.
1.
Lift out the Buckle Lock (A) and then turn the Rotation Lock (B)
counterclockwise to unlock the Light Head Assembly.
2.
Tilt the Light Head Assembly to the desired angle (maximum 90
degree tilt) (A). Turn the Rotation Lock clockwise to lock (B).
CAUTION: Attempting to force the Light Head Assembly into an
angle beyond 90 degrees may damage the unit.
3.
To return the Light Head Assembly to its original position turn the
Rotation Lock counterclockwise to unlock, then return the Light
Head Assembly to the upright position.
Press down the Buckle Lock (A) and then turn the Rotation Lock (B)
clockwise to lock the Light Head Assembly
(A)
(B)
(A)
(B)
(A)
(B)
13
2/24/2014 7:56:30 PM