Stanley FATMAX TPL45S Información De Servicio página 6

2.
Grasp the top of the Tripod Legs and gently lift upward until the three Tripod Legs are all out of the slots on the Unit Base.
The Tripod Legs will then loosen and automatically release. At this
point, the Unit Base will still sit on the floor and the Tripod Legs
have not been locked in place yet.
Grasp the Lower Pole and gently push it upward a bit so that
the Unit Base is suspended off the floor with the Tripod Legs
supporting the unit.
3.
To lock the extended Tripod Legs in place, flip the Lower Latch
inward.
RETRACTING THE TRIPOD LEGS:
1.
Flip the Lower Latch outward to unlock the extended Tripod Legs.
TPL45S_ManualENSP_022414.indd 10-11
LOWER LATCH
10
2.
Raise all three Tripod Legs simultaneously to the top position they
reach without forcing.
Then align the Legs with the Slots on the Unit Base.
3.
Slide the retracted Legs down to fit into the Slots on the Unit Base
and hold the legs in place.
4.
To lock the retracted Tripod Legs in place, flip the Lower Latch
inward.
SLOTS FOR TRIPOD LEGS
(THREE TOTAL)
11
2/24/2014 7:56:30 PM