Multi-Stage Cooking - Kenmore 405.73162310 Manual De Uso

12. FAVORITEFUNCTION
(1) Press Favorite to program and choose up to three cooking procedures.
Each procedure wilt be indicated by 1, 2 or 3 in the display.
(2) Press Favorite until your desired procedure number appears Tn the display.
Press to begTn it. A maximum of two cooking stages can be set for each procedure.
(3) To program a procedure, follow the steps ITsted below. Example: Cook food at 80%
Power Level for 3 minutes and 20 seconds; save as memory 2.
a. Press Favorite twice; screen displays "2".
b. Press Cook Time once, then press "3", "2" and "0" in order.
c. Press Power Level once, then press "8" for "PL 8" to display.
d. Press Favorite to save the procedure. Oven beeps once.
Or press directly to start cooking.
e. To choose the procedure from the memory ITst, press Favorite twice. Screen will disptay "2".
Press to run procedure.
Note: Th :edure wTlt remain programmed until the oven is unplugged or there is a
power failure. If eTther occurs, the procedure will have to be reprogrammed into
the oven.
13. MULTI-STAGE COOKING
At most 2 stages can be set for cooking, if one stage is Defrost t it will automatically set to
be the first stage.
Note: Quick Touch Presets cannot be used in multi-stage cooking.
Example: 80% Power Level for 5 minutes followed by 60% Power Level for 10 minutes;
saved as memory 3.
a. Press Favorite 3 times; screen disptays 3.
b. Press Cook Time once, then press "5", "0" and "0" to set first stage cook time.
c. Press Power Level once, then press "8" to choose 80% first stage cooking power.
d. Press Cook Time again, then press "1 ", "0", "0" and "0" to set second stage cook time.
e. Press Power Level again, then press "6" to choose 60% second stage cooking power.
f. Press _ to immediately start
multi-stage cooking.
g. To choose the procedure from the memory ITst, press Favorite three times. The screen will
display "3"; press to run procedure.
Note: If you do not want to save a particular multi-stage program as a procedure, do not
press Favorite as the first step. Press after programming both stages.
EN-14