Front Panel; Rear Panel - Numark iDJ PRO Guia De Inicio Rapido

FRONT PANEL

1 2 3
1. Microphone Input – ¼" balanced microphone input, routed to the Master Output and Headphone Output.
2. Mic Gain – Adjusts the gain of the microphone channel, routed directly to the Master Output and Headphone
Output.
3. Mic Tone – Adjusts the frequencies of the audio signal coming from the microphone input, routed directly to the
Master Output and Headphone Output. 4. Auxiliary Input – RCA line-level input for external devices, routed directly to the Master Output and
Headphone Output.
5. Auxiliary Gain – Adjusts the gain of the Auxiliary input.
6. Headphone Output – 1/4" and 1/8" outputs for connecting headphones (sold separately).
7. Cue Mix – Adjusts the mix between Cue and Program when using headphones.
8. Cue Gain – Adjusts the volume of the Cue channel when using headphones.
Note: In order to use Cue Mix and Cue Gain with the djay app, ensure Split Output mode is turned on from djay's
Setup menu by clicking the Cogwheel and then set Split Output to 'On'.

REAR PANEL

1. Kensington® Lock – Use this port to attach a security cable to the unit.
2. Master Output (XLR) – Connect this balanced XLR output to a PA system or powered monitors.
3. Master Output (RCA) – Use standard RCA cables to connect this output to a speaker or amplifier system.
4. Cable Wrap – Secures the power cable to the unit.
5. Power Input – Use the included power adapter to connect the unit to a power outlet.
6. Power Switch – This turns the unit on and off.
COMBINATION KEYS
Shift + Play/Pause – The track will momentarily play in a reverse direction. When Play is released, the track will
return to playing in a forward direction.
Shift + Hot Cue – Deletes the Hot Cue.
Shift + Loop x2 – Algoriddim djay will perform a 1/4-beat loop roll.
Shift + Loop x1/2 – Algoriddim djay will perform a 1/8-beat loop roll.
Shift + Auto Loop – Algoriddim djay will perform a 1/16-beat loop roll.
Shift + Reloop – Algoriddim djay will perform a 2-beat loop roll.
Shift + Loop Out – Algoriddim djay will perform a 1-beat loop roll.
Shift + Loop In – Algoriddim djay will perform a 1/2-beat loop roll.
Shift+ Scratch/Search – Enters SEARCH mode.
Cue + Play – Creates a stutter effect when pressed.
Shift + Platter – This will simulate a scratch effect when using the platter.
Kensington is a registered trademark of ACCO Brands
4
5
1
5
6
7 8
4
2
3
5
6