ELICA EHI648SS Guía De Instalación, Uso Y Mantenimiento página 17

7. Attach the hood to the motor housing using 8 screws:
a. First, from above, using 4 screws.
Attention: At this stage, check that cable connection
between the hood and the motor housing is not.
b .Then from the bottom, using 4 screws.
8. Carry out the electrical connection between the hood
and the motor housing.
Note: Use cable locking straps to position the cable
correctly.
9. Join the 2 upper sections of the duct covering the
perforated frame:
a. Verify that hooking fins fit into their corresponding side
fitting slots.
17