Removing The Milling Tool Or Diamond Grinder - Faro MT02 B44 Istrucciones De Uso

5 Operation 101
▶ Check that the cutter or grinder is seated by pulling on it.

5.4 Removing the milling tool or diamond grinder

WARNING
Hazard from rotating cutter or grinder.
Lacerations and damage to the chucking system.
▶ Do not touch rotating cutter or grinder.!
▶ Never press the press-button while the cutter or grinder is rotating!
▶ Remove the cutter or grinder from the contra-angle handpiece after
treatment to avoid injury or infection while storing it.