Glacier bay 67778-0001 Guía De Instalación Y Cuidado página 20

Installation (continued)
3
Installing the faucet assembly
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
□
Before installation, remove the ange (G).
□
Place the escutcheon (H) on the bottom of the
new faucet assembly (A).
□
Retract the hose (1) up through the faucet body
until the hose tting is ush with the bottom of
shank (2). Do not pull the hose tting past the
shank.
□
Insert the faucet assembly (A) through the hole
in the escutcheon (H).
NOTE: Do not feed the hose (1) back down through the
spout until step 6.
H
A
2
1
4
Securing the faucet assembly
□
Install the plastic washer (B), and metal washer
(C) onto the threaded mounting shank.
□
Thread the nut (D) onto the mounting shank.
Lock the nut (D) into position by tightening the
screws (E). Do not overtighten.
G
20
Please contact 01-800-00-4663-3 for further assistance.
B
C
D
E
HOMEDEPOT.COM.MX