Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ADDiTiONAL
THINGS YOU SHOULD
KNOW
Now that you understand
the basic operation
functions, here are more control features
with which you should become
familiar.
The "cool" circuit has an automatic
3 minute time delayed
start if the unit is turned off and on quickly. This prevents
overheating
of the compressor and possible circuit breaker
tripping.
The fan will continue to run during this time.
There is a 2-Second
delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility
of having to roll through to select another mode.
The control will maintain the set temperature
within 2 degrees
Fahrenheit,
between
60F and 90F degrees.
If the unit is turned off in heat mode (if applicable)
or fan only mode, it will return to the same setting when it is turned
on again.
When the unit is turned
off in cool or energy
saver mode, it will run in energy
saver mode when it is turned on again,
but
the setting of temperature
and fan speed will remain.
Models
with a key hole overflow drain hole can use drain kit 5304481680
to connect a 1/2 inch drain hose for safe
disposal
of excess system water. This part can be ordered
at www.SearsPartsDirect.com.
The control is capable
of displaying
temperature
in degrees
Fahrenheit
or degrees
Celsius. To convert from one to the
other and back, press and hold both the "TEMP/TIMER"
Up(A)
and Down (v)
buttons for 3 seconds.
FAULT CODES :
If the display
reads "ES" or "AS", a sensor has failed.
Contact
1-800-4-MY-HOMEQ
for repair.
Evaporator
coil sensor
Air temperature
sensor
AUTO RE-START :
After a power outage, the unit will remember
the last setting and return the unit to the same setting once power is restored.
EXHAUST
CONTROL
:
This Exhaust Control allows the air conditioner
to either
recirculate
inside air (CLOSED) or exhaust air to the outside
(OPEN).
The CLOSED position
is used when maximum
cooling
is desired.
It may also be used for air recirculafion
without
cooling when the air conditioner
is set in any FAN position.
The OPEN position
removes stale air from the room and exhausts it to the outside. Fresh air is drawn
in through
normal
passages
in the home.
4-WAY
LOUVERS
Air directional
louvers
control air flow
direction.
Your air
conditioner
has the 4-way
directional
system described
below.
The louvers
will allow
you to direct
the air flow
Up or Down
and Left or Right throughout
the room as needed.
Use the
central
handle
to adjust
the air directional
louvers
side-to-side
until the desired
Left or Right direction
is obtained.
Pivot
horizontal
louvers
with your fingertips
until the desired
Up/Down
direction
is obtained.
There are a total
of 4 possible
air directional
orientations
available
with this system.
8
Tabla de contenido
