S&P VMC AKOR ST HR Manual De Instrucciones página 19

7.1.2 Filters

using a flat screwdriver (4mm),
remove the clips,

Remove the filter holder,
Dust off the filters with a brush or vacuum cleaner.
Filters can also be cleaned in warm soapy water. Allow them to dry completely before putting them back into
the unit.
7.1.3 Exchanger

Note : To avoid breaking the cover, fully release the 6 fixing points before lifting the cover.
ENGLISH

slightly tilt the extraction face
with the filter,

unclip the filter holder to
release the filter,
Release the 6 attachment points as shown in the diagram above.
19 / 40

then raise it with the filter
upwards,

Do the same for the fresh air
intake.
NT_51895501_AKOR ST HR-AN_140325.docx