Tabla de contenido
Idiomas disponibles
Idiomas disponibles
After use the Vacuum-Blower should be thoroughly cleaned.
Ensure that the Vacuum-Blower is switched off and disconnected from the mains supply.
Remove and empty the debris collection bag. Ensure that the Vacuum / Blow selector lever
operates smoothly and that it is not obstructed by debris. Brush any loose debris from around
the fan and inside the suction/blower tube.
Do not use any type of cleaning solvent on the plastic parts of the Vacuum-Blower.
10. POWER CORD MAINTENANCE
If the supply cord needs replacing, the task must be carried out by the manufacturer, the
manufacturer's agent, or an authorised service centre in order to avoid a safety
hazard.
11. TROUBLESHOOTING
Attention! Always remove the plug from the mains socket before starting any work on
the machine.
•
The machine won't start: Check whether the switch is in the "ON" position; check that
the residual current circuit breaker is not switched off and that no fuses have blown in
its electric circuit. If the machine still won't start have it inspected by an authorised
customer service firm.
•
The machine won't vacuum: Check whether the leaf collection bag is full. If it is,
empty it; check whether the lever for the reversing flap is in the correct position,
otherwise have the machine inspected by an authorised customer service firm.
•
The machine won't blow: Check whether the lever for the reversing flap is in the
correct position, otherwise have the machine inspected by an authorized customer
service firm.
•
The shredder wheel is blocked: Check whether an object has been sucked in that is
too large; a piece of wood, cardboard or other object has become jammed between the
impeller and shredder chamber. If the shredder wheel remains blocked have the
machine inspected by an authorised customer service firm.
•
If the machine vibrates, please immediately stop using it. Have the machine inspected
by an authorized customer service firm.
12. WASTE DISPOSAL AND ENVIRONMENTAL PROTECTION
If your device should become useless somewhere in the future or you do not need it any
longer, do not dispose of the device together with your domestic refuse, but dispose of it in an
environmentally friendly manner. Please dispose of the device itself at an according
collecting/ recycling point. By doing so, plastic and metal parts can be separated and recycled.
Information concerning the disposal of materials and devices are available from your
local administration.
13. REPAIR SERVICE
Repairs to electric power tools should only be carried out by specialist electrical personel. In
the case of a claim for guarantee or defects, please contact the place of purchase.
14.WARRANTY
21
Tabla de contenido
