Tabla de contenido
Idiomas disponibles
Idiomas disponibles
8.3 Using the Vacuum-Blower
Do not attempt to pick up wet debris, allow fallen leaves
etc, to dry out before using the Vacuum Blower. The Vacuum-Blower can be used to blow
debris from patios, paths, driveways, lawns, bushes and borders. It will also pick up leaves,
paper, small twigs and wood chippings.
When the using the Vacuum Blower in Vacuum mode the debris is sucked up the suction
tube before being ejected into the debris collection bag, as the debris passes through the
suction fan it is partially shredded. The shredded organic debris is ideal to use as mulch
around plants.
Warning!
Any hard objects, such as stones, tin cans glass etc, will damage the suction fan.
Important!
Do not use the Vacuum-Blower to suck up water or very wet debris.
Never operate the Vacuum-Blower without the debris collection bag fitted.
8.4 Blower mode
Inspect the area to be worked before starting. Remove any objects or debris that could be
thrown, jammed or become entangled in the Vacuum-Blower. Select the blow function using
the selector lever on the side of the machine and switch on. With the Vacuum- Blower resting
on its wheels move the Vacuum-Blower forwards directing the nozzle at the debris to be
cleared.
Alternatively hold nozzle just above the ground and swing the machine from side to side,
moving forwards and directing the nozzle at the debris to be cleared. Blow the debris into a
convenient heap then use the vacuum function to collect the debris.
8.5 Vacuum mode
Inspect the area to be worked before starting. Remove any objects or debris that could be
thrown, jammed or become entangled in the Vacuum-Blower. Select the vacuum function
using the selector lever on the side of the machine and switch on. With the Vacuum- Blower
resting on its wheels move the Vacuum-Blower forwards directing the nozzle at the debris to
be collected. Alternatively with the Vacuum-Blower held just above the ground swing the
machine from side to side, moving forwards and directing the nozzle at the debris to be
collected. Do not force the nozzle into the debris as this will block the suction tube and reduce
the efficiency of the machine. Organic materials such as leaves contain a large amount of
water that can cause them to stick to the inside of the suction tube. To reduce sticking the
material should be left for a few days to dry out.
9. CLEANING AND STORAGE
Make sure that all nuts, bolts and screws are tight and that the guards are fitted correctly.
All damaged and worn parts should be replaced in order to maintain the Vacuum-Blower in a
safe working condition.
Never leave material in the Vacuum-Blower or the debris collection bag. This could be
dangerous when starting the Vacuum-Blower.
20
Tabla de contenido
