Sd Card Replacement; Connect To Vuze Camera App - Wifi On/Off - Human Eyes VUZE+ Manual Del Usuario

Operation

SD Card Replacement

• Insert the SD card into the micro SD slot and press it into place.
To remove the card, press on it and then remove it. Place a new SD card into the slot and press
•
.
into place
The camera will support micro SD cards with UHS-I (Ultra High Speed) speed class and
above.
The camera allows two bit rate settings for recording- 120MB and 80MB (set through the
mobile app). When recording at 120MB bit rate we recommend to use UHS-I (U3) – Ultra
High Speed Class with U3 Speed Class Mark. When recording 80MB bit rate we
recommend to use UHS-I (U1) (Ultra High Speed Class with U1 Speed Class Mark) SD
cards.
We tested and validated SD cards types from different vendors. You can find the
recommended SD card list on our website www.vuze.camera/support
Do not remove the SD card while capturing with your camera or while the camera is
connected to a computer.
Connect to Vuze Camera App – WiFi On/Off
Vuze Camera App allows you to control your camera remotely using your mobile device. You can download
Vuze Camera App from Google Play or Apple Store and follow the steps below to connect to your camera:
1. Turn the camera on.
2. Push the WiFi button. Blue LED starts to blink.
3. Connect your mobile device to the camera's WiFi. Your camera's WiFi SSID is its Serial Number, as
appears on the bottom of the camera. The default password for your WiFi is 12345678. The WiFi name
and password can be changed through the App's settings after the first connection. Once connected the
blue LED will turn on.
4. Operate the camera via the Vuze Camera App.
13 Proprietary. Humaneyes Technologies