What Display Symbols Mean - Life Sourse Deluxe One Touch Digital Wrist Guía De Instrucciones

WHAT DISPLAY SYMBOLS MEAN

Display Symbol
Battery Full
Battery Low
E-2
Condition/Cause
The symbol shown while
measurement is in progress. It
blinks while detecting the pulse.
An irregular heartbeat or body
movement may have occurred.
Refer to page E-7 for more
information on irregular heartbeats.
Previous measurement stored in
MEMORY.
The battery power indicator during
measurement.
The batteries are low when it
blinks.
Unstable blood pressure due to
excessive body movement.
The systolic and diastolic values are
within 10 mmHg of each other.
The pressure value did not increase
during inflation.
The cuff is not fastened correctly.
There is an air leak in the cuff or
monitor.
The pulse is not detected
correctly. The symbol will appear
on the pulse display area.
Cuff Inflation Meter
Pressure Rating Indicator™
LifeSource Health Line (Toll-Free): 1-888-726-9966
Recommended Action
Measurement is in progress,
remain as still as possible.
Take measurement again and
consult with your physician.
Replace all batteries with
new ones when the symbol
blinks. Alkaline batteries
recommended.
Try the measurement again.
Remain very still during the
measurement.
Fasten the cuff correctly, and try
the measurement again.
Check for air leaks along the
tube and around the air socket.
Refasten the cuff and retake
measurement.
Make sure tube is properly
connected to cuff and monitor.
Try the measurement again.
Remain very still during the
measurement.
Measurement is in progress,
remain as still as possible
Refer to the section "About
Pressure Rating Indicator" for
further explanation.