Kalorik GR 45386 Manual Del Usuario página 3

LID HANDLE ASSEMBLY
A. Handle
B. Handle base
C. Silicone gasket
D. Glass lid
1. Insert the Screw through the Metal Washer and then the Plastic
Washer.
2. Insert the Screw and the washers through the bottom of the Glass
Lid.
3. Place the Silicone Gasket on the threaded end of the Screw on the
top of the Glass Lid.
4. Place the Handle Base over the Silicone Gasket.
5. Thread the Handle onto the Screw and tighten using a Phillips-head
screwdriver.
www.KALORIK.com
E. Plastic washer
F. Metal washer
G. Screw
3
A
B
C
D
E
F
G
GR 45386 – 180330