Maintenance And Service - SMASH TWIG 130 W Manual De Instrucciones

Never use scissors when on a ladder, in a tree or any
other unstable place. Do not saw with one hand.
If you cut a branch that is in tension be aware of the
possible rebound of the branch when making the cut.

7. MAINTENANCE AND SERVICE

The removal of safety devices, improper
maintenance, replacement of the bar and / or chain
with non-original spare parts can cause severe bodily
injury.
Always perform maintenance or service tasks with
the battery unplugged.
Perform the following maintenance and care
operations when you finish working with the machine
to ensure the proper functioning of this machine on
future occasions.
7.1 BLADE REPLACEMENT (FIG. 4A-4C)
Always wear protective gloves when changing the
blade.
Never attempt to operate the machine without the
blade, spacer or screw properly secured to prevent
damage to the machine.
To remove the blade, use a hexagonal wrench (not
supplied) to remove the nut 11 that secures the blade.
Remove the wavy washer from the blade 9 and the
washer 8 and then remove the screw 10 from the
blade (Fig. 4a). Remove blade 1 along 45 ° (Fig. 4b).
28/68 - English
To insert the blade, be careful not to allow foreign
material to adhere to the blade gear and not damage
it.
First insert part of the blade 1 tooth into the box,
then rotate the blade 1 until the hole in the blade 1
is aligned with the hole in the aluminum gearbox.
Incorrect blade location will damage the machine.
Replace the blade screw, then replace washer 8
and wavy washer 9, finally tighten nut 11. Do not
overtighten.
7.2. LUBRICATION
The lubrication of the blade area is essential to
guarantee the life of the blade and the scissor motor.
Lubricate the gear and with a few drops of oil always
before starting work and every 10 minutes of work.
Never apply grease to the blades.
7.3. BLADE SHARPENING.
Sharpen the blade every 100 cuts at most to ensure
proper cutting edge. An edge of poor quality will imply
an additional effort for the scissors and the cut will not
be clean, which can cause diseases in the area of the
plant cut.
SMASH TWIG