Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SMASH TWIG
5.3. INSTALL THE BATTERY
Install the battery by sliding the battery along the rails
until it is securely connected to the machine.
To remove the battery, press the tab and pull the
battery.
5.4. STARTING AND STOPPING
Machine on:
Press the safety lock and then without releasing the
safety lock, press the trigger. The sheet will open and
be ready to work.
Do not start and stop the machine repeatedly in a few
seconds, it will subject the engine to important work,
generate enough heat and reduce the life of your
engine and battery. We recommend that each time
you wait for the machine for at least 5 seconds before
restarting it.
6. USE OF THE MACHINE
Use this machine only for the uses for which it has
been used. The use of this scissors for any other use
is dangerous and may cause damage to the user and
/ or the machine.
Cut only wood. Do not use this machine for other
purposes not provided. For example: do not use this
machine to cut plastic materials, bricks or metals. The
use of this machine for operations other than those
planned may cause dangerous situations.
If you slip or lose your balance or fall, release the
trigger immediately.
Do not rely solely on the safety devices of this
machine.
Do not use this machine if you are tired, ill, have taken
medications, narcotics or alcohol.
Do not expose this machine to rain or wet
conditions. Water entering this machine will
increase the risk of electric shock.
Do not use this machine at night, in fog or with
reduced visibility that does not allow you to clearly see
the work area.
Lack of rest and fatigue can cause accidents or
damage.
Never leave this machine unattended.
Do not allow anyone to enter the work perimeter.
This work perimeter must be 15 meters and is a
dangerous area.
English - 27/68
Tabla de contenido
