Safety Rules; Hazard Symbols And Meanings - Briggs & Stratton 030319 Manual Del Operario

SAVE THESE INSTRUCTIONS
TABLE OF CONTENTS
Safety Rules .................................... 2-4
Features and Controls ............................. 5
Assembly ...................................... 6-7
Operation .................................... 8-II
Specifications ................................... 12
Maintenance ................................. 13-16
Storage ........................................ 17
Troubleshooting ................................. [8
Notes .................................... 19 & 22
Emissions Control _¢arranties ................... 20-2 [
_¢arranty ...................................... 23
Espa_o[ ..................................... 24-44
EQUIPMENT
DESCRmPTiON
Read this manual carefully and become
v- familiar with your generator. Know its
applications, its limitations and any hazards
invomved.
The generators are an engine-driven, revolving field,
alternating current (AC) generator. It was designed to
supply electrical power for operating compatible electrical
lighting, appliances, tools and motor loads.The generator's
revolving field is driven at about 3,600 rpm by a single°
cylinder engine.
CAUTION! DO NOT exceed the generator's
wattage/amperage capacity. See '°Don't Overload
Generator".
Every effort has been made to ensure that information in
this manual is accurate and current. However, we reserve
the right to change, alter or otherwise improve the product
and this document at any time without prior notice.
The Emission Control System for this generator is
warranted for standards set by the Environmental
Protection Agency and the California Air Resources Board.
SAFETY RULES
This isthe safety alert symbol. Itisused to
alert you to potential personal iniury hazards.
Obey all safety messages that follow this
symbol to avoid possible iniury or death.
The safety alert symbol (_) is used with a signal word
(DANGER, CAUTION,WARNING), a pictorial and/or a
safety message to alert you to hazards. DANGER indicates
a hazard which, if not avoided, will result in death or serious
iniury. WARNING indicates a hazard which, if not avoided,
could result in death or serious iniury. CAUTION
indicates a hazard which, if not avoided, might result in
minor or moderate iniury. CAUTION, when used
without the alert symbol, indicates a situation that could
result in equipment damage. Follow safety messages to
avoid or reduce the risk of iniury or death.
Hazard
Symbols
and Meanings
Operator's Nanual Electrical Shock
Explosion Fire Flying Objects
Toxic Fumes Kickback Hot Surface
Copyright © 2006 Brigs & Stratton Power Products
Group, LLC. All rights reserved. No part of this material
may be reproduced or transmitted in any form by any
means without the express written permission of Briggs &
Stratton Power Products Group, LLC.