Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
Unit will not operate
Reduced airflow or
poor filtering
Excessive noise
Replace filter light
remains lit after
filter replacement
The unit seems to be
producing odors
POSSIBLE CAUSE
• Unit is not plugged in
• Unit not turned on
• No power at outlet
• HEPA filters not installed properly
• Plastic wrapping not removed
• The back grille cover may
be blocked
• The pre-filter may be clogged
• The unit is not level
• PetPlus odor filters still in
plastic bags
• The filters are not seated properly
• The filters may be dirty
restricting air flow
• The replace filter indicator
needs to be reset
• The filters need replacing
• Plug unit in
• Press the POWER button to turn on
• Check circuits, fuses, try a
different outlet
• Re-install the HEPA filters
• Remove plastic wrapping
from filters
• Check to make sure nothing
is blocking the back grille cover
and air intake
• Check and clean the pre-filter
• Place the unit on a flat,
even surface
• Remove the PetPlus filters
from plastic bags
• Make sure all filters are secured
• Replace the filters
• Press and hold the replace filter
button until you hear a beep
• Replace the filters as needed
11
SOLUTION
Tabla de contenido
Solución de problemas
