Rear Panel - Denon Professional DN-F350 Guia Del Usuario

Rear Panel

1. Bluetooth Receiver: This is the built-in antenna used to receive a signal from a Bluetooth device.
2. USB Slot: This USB slot is used to update the unit's firmware with a mass-storage-class USB device. Visit
denonpro.com to check for available updates. See
3. Operation Switch: For standard playback, leave this switch at the "Normal" position. If updating the unit, set this switch
to the "Update" position.
4. Outputs (balanced XLR): These outputs send the audio signals from the Mic/Line input, SD, Bluetooth, USB device
(mass storage class), and Aux In. Use XLR cables to connect these outputs to external speakers, sound system, etc. See
Setup for more information.
5. Outputs (unbalanced RCA): These outputs send the audio signals from the Mic/Line input, SD, Bluetooth, USB device
(mass storage class), and Aux In. Use RCA cables to connect these outputs to external speakers, sound system, etc. See
Setup for more information.
6. AC In: Use the included power cable to connect this input to a power outlet. See
Display
1. Media Type: This is the currently selected media: LINE, AUX,
USB, SD, or Bluetooth. See
Playback Source for more information.
2. Playback Operation Icon: This shows various symbols to
indicate the current playback status:
Playing
Paused
Stopped
3. Information: This shows extra information about the media being played.
4. Track/File Number: This is the number of the track or file.
5. Function Icons: This shows various symbols to indicate these current functions:
Random Playback

Single mode
Repeat One
Repeat All
t
(see Features > Front Panel > Pitch/Tempo -/+
C
6.
Time: With SD and USB sources, this displays how much time has elapsed, the remaining time, total elapsed time, or the
total remaining time shown as hh:mm:ss (hours, minutes, and seconds).
2 3 4
1
Other Information > Updating the Firmware
Operation > Selecting Media
Rewinding
Fast-Forwarding
5
Setup
for more information)
6
for more information.
for more information.
5