Safety Instructions - Denon Professional DN-F350 Guia Del Usuario

User Guide (English)
Introduction
Please see this guide's
Operation chapter to start using DN-F350.
Box Contents
DN-F350
Power Cable
Remote Control
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (documentation, technical specifications, system requirements, compatibility
information, etc.) and product registration, visit denonpro.com.
For additional product support, visit denonpro.com/support.

Safety Instructions

Please also see the included Safety & Warranty Manual for more information.
Before turning the power on:
Proper ventilation:
About condensation:
Cautions on using mobile
phones:
Moving the unit:
About care:
Rackmount warnings:
(required rack specifications for
mounting the unit in a rack)
Rack installation:
Setup chapter to learn how to integrate DN-F350 with your audio system, and then refer to the
Make sure all connections are secure and correct and that there are no problems with the
connection cables.
Power is supplied to some of the circuitry even when the unit is powered off. When the unit
will not be used for long periods of time, disconnect the power cable from the power outlet.
If the unit is left in a room which is not properly ventilated or is full of smoke from cigarettes,
dust, etc. for long periods of time, the surface of the optical pickup may get dirty, causing
incorrect operation.
If there is a major difference in temperature between the inside of the unit and the
surroundings, condensation may form inside the unit, causing the unit not to operate
properly. If this happens, let the unit sit for an hour or two while powered off, and wait until
there is little difference in temperature before using the unit.
Using a mobile phone near this unit may cause noise. If this occurs, move the mobile phone
away from this unit when it is in use.
Before moving the unit, turn off its power and disconnect the power cable from the power
outlet. Next, disconnect its connection cables from other devices before moving it.
Wipe the cabinet and control panel clean with a soft cloth.
Follow the instructions when using a chemical cleaner.
Do not use benzene, paint thinner, insecticide, or other organic solvents to clean the unit.
These materials can cause material changes and discoloration.
EIA standard 19-inch (48.3cm) rack
1U-size installation compatible rack
Rack that has a guide rail or shelf board that can support this device
This product will work normally when the player unit is
mounted within 10° off the vertical plane at the front panel. If
the unit is tilted excessively, the disc may not load or unload
properly. (See image.)
Maximum
10°
Unit
3